Category Archives: Harry Potter Party

Harry Potter – Books from the Library

It is time for more Harry Potter! Clearly, this has become a “thing” for me. I created these two Harry Potter textbooks for our Harry Potter Trunk-or-Treat.  I popped them in the cauldron I had made for the Harry Potter party. Becuase we had the whole Trunk-or-Treat props to create, I was working on a tight deadline and so I will have to confess that I really didn’t write down supplies and tools I used to create these. That just adds to the mystery, right? However, if you have a specific question about how I created something just drop me a line. Without further ado, we enter the Hogwarts Library.

Straight from the Hogwarts library

Both books started life as blank journals. I found the larger book at a discount store and the smaller book came from my local craft store.

Dragons – created by Jennifer Miner

The Dragon book was referenced in Harry Potter and the Sorcerer’s Stone where Hagrid borrowed a copy from the Hogwarts Library to learn about a dragon egg he had acquired.

I started by creating the dragon scales using a stencil and dimensional paste. I used a variety of products to get the color correct. Some paint, a little mist and finally a little Distress Stickles.

Harry Potter Inspired Textbook

Next came the “leather” portion. For this, I used heavy cardstock and more paint with a little stamping on top. Then I applied a little vaseline in a few areas and painted over the whole thing with a few shades of brown acrylic paint. I then tore the corners and adhered it to the front. I also distressed my edges to add to the whole feel.

Detail on the Dragons book

I added the corner details which were created using chipboard accents colored using Prima Marketing’s Patina kit.

More up close detail

Next, I started on the title. I used my Silhouette Cameo to cut out the lettering from white cardstock and then I attacked it with all of my distress metallic supplies. I made two accent bands using a variety of tools and techniques.

Dragons: Breeding for Pleasure and Profit created by Jennifer Miner
To create the subheading I used my printer the wording and then I used carbon paper to transfer the words to my cardstock. I then tracked over the wording with a Sharpie pen. I knew I wouldn’t be able to recreate this on my own.
Book created by Jennifer Miner

I used a ton of different distress techniques on the book and I was really pleased with how it turned out.

Harry Potter Inspired Books handmade by Jennifer Miner

Now on to the smaller Quidditch book. The snitch in the center was created with polymer clay and gilding wax. The wings are from Tim Holtz and were colored with Pearl Alcohol Ink Metallic Mixitive. The title and shield and title were cut using my Silhouette Cameo.

Title Close-up

I used Distress Inks, paint, Crackle Paint, stain, sprays on the cover to create the work look. I also stamped a large compass to add to the effect.

Quidditch: A Complete History

I used metallic corners that I used the Patina Medium on for the corners.

Not your average library book

The metal ribbon holder and title frame are from Stampin’ Up! They are really old and have been hiding in one of my drawers for ages.

Created by Jennifer Miner

I also added metallic nailhead rhinestones and gems for just a little bling, I really love the colors on this book cover.

Inspired by Harry Potter. Quidditch book

IThe larger decorative strip is a piece of faux leather fabric leftover from my Brave costume.

Quidditch: A Complete History

I hope you enjoyed seeing my books as I had a blast experimenting and creating these. I wasn’t trying to make them match but I guess I tend to go for similar colors.

Created by Jennifer Miner

As always, thanks for popping by and checking out the latest Harry Potter addition.

Harry Potter Trunk-or-Treat

Halloween was over a month ago, but I am sure that you all are thinking about next year already! Okay maybe not but between getting this post ready and my Halloween Lantern Village in progress things are this weird mix of Halloween and Christmas around here. Hopefully, you too will get the all-year Halloween bug with our Harry Potter Trunk-or-Treat.

Now, let me start by describing what a Trunk-or-Treat is, just in case you are unfamiliar. In our area, most Trunk-or-Treats are hosted by churches. Basically, you go to the parking lot and decorate your car, more specifically your trunk or in our case the bed of our truck. Then the kiddos come around and collect the candy.  This year’s event had about 30 participants, each class has a representative. Since I was not sewing Little Misses costume this year I had some spare Halloween energy just floating around. I knew it had to be cool and big and Harry Potter themed.

Harry Potter Trunk-or-Treat

This was our entry! My husband wore his Harry Potter robe. I dressed as McGonnagal, our other parent volunteer came as Rita Skeeter, and we picked up a spare Bellatrix Lestrange from the front office. We built our castle using 2x4s and plywood. I had my in-house engineer (aka the husband)  help me with the design and build. The wall is about 7 feet tall and fits right about the tailgate and comes in two pieces, which were joined on-site. Next, I skinned the wall with insulation foam. This comes in large sheets at the hardware store. Once the walls were covered with the foam I used my Dremel-like tool to carve in the stones. Once that was done. I then heat the foam with my paint stripping gun (hot!). This causes the foam to contract where it has been carved and gives it a more authentic look.

In-Progress

At this point, I really should have covered my walls with monster mud but I was afraid to add to much weight, so I just used craft acrylic to paint my walls. I used a sea sponge to get the stone look. I used a beige color for the mortar and three shades of gray on the blocks. This took awhile, mostly because I had to keep running to the store to buy more.

In-Progress – Wall with the foam carved and heated

I create the “Hogwarts” sign with more foam and a lot of carving with the Dremel. I printed out a guide that I traced onto the foam to use as a guide. Then carved around the letters. I then hit is with the heat gun before adding the Monter Mud. This gave the piece a lot of strength and didn’t seem to add too much weight.  I painted it to match my wall.

I cut a Hogwarts silhouette out of plywood for the bed of the truck. We used fabric stapled to the top of the wall to give the whole thing some depth. We also added a background made from 2x4s and plywood behind the castle silhouette. I bought a fancy light projector that I shone on the background, this was supposed to look like it was behind the castle but it was too bright out so it was a little less than I had hoped for.

Plywood Silhouette
In-Progress Testing

We drug out all the Harry Potter Party props that we could lay our hands on, really it was everything that I could fit in the truck. We bought:

  • 2-cauldrons
  • Directional Signposts
  • Giant Spider
  • Trunk
  • Caged Pixies
  • Hedwig
  • Snape Cut-out
  • Sorting Hat
  • Fawkes
  • House Banners
  • Signs
  • Snitch
  • Rats
  • Potions
  • New Harry Potter Textbooks
  • Smoke Machine
  • Monster Book of Monsters
  • Gryffindor Scarf
  • Bertie Bots & Chocolate Frog Boxes

I also loaded the soundtrack to my phone and played it through a Bluetooth speaker. This was so much fun! The Hubbs would like the castle to find a new home but I really would like to keep it for down the road, I guess we’ll see. Hopefully, this will inspire you to create your own Trunk-or-Treat.

Harry Potter Shadowbox

Welcome! I can’t seem to stay away from Harry Potter, not that I am complaining. Today, I have created a new project for all you Harry Potter fans – a tribute shadowbox. I am considering making these available for sale down the road. I am also working on a teacher appreciation shadow box which should be done soon.

Harry Potter Shadowbox

I created this project using my Silhouette Cameo and Silhouette Studio Design Edition Software. I used only white cardstock as my base and then a ton of different tools to create the different looks.

Out of the frame – Harry Potter Shadowbox

I wish I had taken a photo of my desk when I was done, it looked like a craft bomb had gone off. I did my best to write down all of the supplies and I will list those at the end. This was so much fun to create and I had way more ideas than would fit in this 8″x10″ frame. Hedwig is my very favorite.

Harry Potter Initials

I used a lot of misting sprays and embossing powders, distress ink, Glossy Accents and PearlEx powders to pull this Harry Potter Shadowbox together.

Dobby

I love how the Dobby element turned out. This was cut with my Silhouette Cameo and then the background was misted with a variety of Glimmer Mists from Tattered Angels.

Stag Patronus

I reused the stag shape I created for my Always Painting. The stage and back frame were colored with Distress Stain and the blue mat was colored with more color mists.

Hedwig

Above you can see Hedwig and a glimpse of the wand. Hedwig was my favorite element. I added a little Glossy Accents to her eyes.

Quote with Hogwarts

The Hogwarts quote panel was created with Distress Inks, Pearl Ex Powders and Distress Stain. The Harry panel was also created with Distress Stain, Distress Inks, and Distress Marker. The back mat was created with Embossing Powder. The Deathly Hallows Panel was done with Glimmer Mist and Silver Embossing Powder.

8″x10″ Harry Potter Shadowbox by Jennifer Miner

Overall I am happy with how this latest project turned out. I am looking forward to creating and sharing more! As always, thank you for your time!

Supplies

Glimmer Mist: Purple Rain, Granite, Jack Frost, Copper, Lavender Fields, Silver Sugar, Oriental Poppy, Penny, Money Bags, Key Lime Pie – Tattered Angels

Heidi Swapp Color Shine: Black Velvet & Teal

Distress Spray: Black Soot & Peacock Feathers – Ranger

Dylusions Ink Spray: Postbox Red & London Blue – Ranger

Perfect Pearls Mist: Perfect Pearl & Bronze – Ranger

Distress Stain: Rusty Hinge, Tea Dye, Vintage Photo, & Walnut Stain – Ranger

Distress Paint: Brushed Pewter – Ranger

Embossing Powder: Gold, Red, & Copper Zing – American Crafts, Copper – My Sentiments Exactly, Sterling SIlver & Clear – Stampin’ Up

Distress Marker: Aged Mahogany – Ranger

Distress Ink: Tea Dye, Vintage Photo, Weathered Wood, Antique Linen, Tumbled Glass, Black Soot, Fired Brick, Salty Ocean, Mermaid Lagoon, & Fossilized Amber – Ranger

Misc: Pearl Ex Powder – True Blue, VersaMark, Industrial Stamp – Stampendous, Glossy Accents – Ranger

Frame – Gunnabo – IKEA

Harry Potter Wands DIY

Back again with more Harry Potter Magic! One of the events at our party was the wand selection. This was so much fun! I created each unique wand and they were all very different. Some were inspired by the films and some from my imagination. The kids had a great time picking out their wands and I had a great time creating them.

All the pretty wands
Inspired by Dumbledore’s Wand

I had seen a lot of the hot glue wands online and while they looked easy and quick to create I really wanted to create something that gave me more control over the shape of the wands. In addition, I really don’t need any more hot glue burns. So I came up with these Harry Potter wands for our party!

Under the Sea Wand
Medieval Wand

Each wand started as a plain wooden dowel. I bought a pack of 12″ wooden dowels and trimmed a few from dowels I had laying around. (Yes, you read that right I do have dowels just laying willy nilly around this place.) I trimmed them using my scroll saw after the sculpting dried. This allowed me to make the length match the wand since some of these took on a life of their own.

Unicorn Horn Wand
Inspired by Minerva McGonagall’s Wand

To start, I used 100 grit sandpaper to rough up the surface of my wood. I then mixed up some Apoxie Sculpt. This was my first time using this product and I was really pleased with the end result. It was easy to work with and I liked the way it smoothed out with a little bit of water. One thing that I struggle with when using polymer clay is fingerprints.

Copper & Midnight Wand
Red & Gold Band

Some of the wands had clear plans and I looked up photos online to find exactly what I wanted. I wanted to be sure that I didn’t have any flat spots on my wands so I filled an old paint water cup with leftover decorative sand from my cauldron and I stuck the wands in there. this held them up while they dried – voila no flat spots.

Inspired by Sirius Black’s Wand
Hedwig Wand

I will admit that the dragon was my favorite. It was so much fun. Once all the wands were cured I used my scroll saw to trim down the wands. I also sanded a few of the wands where they needed it, mostly to smooth the transition from sculpture to the dowel. Now I was ready to start painting. I used craft acrylics, for some of the “wood” looking wands I really thinned down the paint to make a wash. Again, I used my cup of sand to hold them while they dried.

Spring Wand
Lizard Wand

I used craft acrylics, for some of the “wood” looking wands I really thinned down the paint to make a wash. Again, I used my cup of sand to hold them while they dried. It was so much fun to see the wands take shape. The paint made the wand’s personality just jump out. It was really fun to think about which kiddo would go for which wand.

Inspired by Harry Potter’s Wand
Purple Jewel Wand – this one has a tiny gemstone on the end
Elder Wand with Dragon Wand

When all the wands here cured, trimmed and painted I was ready to seal them. I used a high shine spray sealer and gave each wand a few coats. In the end, I created 20 wands and managed to use one 1 lb  Apoxie Sculpt. It comes in two 8 oz containers that you mix equally, in the amount you need. It is air dry medium but I felt like I had a length of time to work with it before and as I mentioned above, I loved that you can smooth it out with water.  I really liked my Hedwig Wand but my daughter’s first guess was that it was going to be a penguin and then once I had painted it she kept calling it a pigeon. I think she was just giving me a hard time, however, I really liked that one.

Sea Snake wand
Inspired by Luna Lovegood’s Wand

For the party, I created an Ollivander’s Storefront that held the wands, I will share the creation of the project down the road! Thanks for stopping by!

Fire Twist Wand
Red Lacquer Wand
Dragon Wand Close-up

Harry Potter Party – Golden Egg

That’s right today’s Harry Potter Party project is the Golden Egg! When Harry opens the egg underwater it gives him the following clue in Harry Potter and the Goblet of Fire.

Come seek us where our voices sound,
We cannot sing above the ground,
And while you’re searching ponder this;
We’ve taken what you’ll sorely miss,
An hour long you’ll have to look,
And to recover what we took,
But past an hour, the prospect’s black,
Too late, it’s gone, it won’t come back.

Harry Potter’s Golden Egg

Now, my egg didn’t open and I am not sure that you would want to put it underwater, but it was fun to create. Per usual, I started my creation with lots of research. The Noble Collection has a beautiful Golden Egg for sale and they had great photos.

Inspired by Harry Potter and the Goblet of Fire

I started by sketching my design based on the photos I found on the internet. I was able to find an unfinished paper mache egg at Target that was the right size. The egg has a slightly flat bottom which allows it to stand without falling over.

My Golden Egg

My next step was to apply air dry clay all over my egg. I sculpted the owl at the top and then started carving. I used my sketch as a guide. I’d love to tell you that I had everything laid out perfect and that it just worked out but that would not be the truth. I got about 3/4 of the way through my carving and realized that I was going to have too much room. So, I just had to make it work. I added a few additional buildings and my “secret” message. I tried to keep with the style of the rest of the egg.

Special message for the Birthday Girl

These things just happen sometimes and I really believe that they are just a part of the process. The air dry clay cured very quickly so there wasn’t much time to mess around trying to fix anything anyway. Once it was done, I was pretty happy with the overall look.

View of the top
Another View of the Golden Egg

I left my egg to cure. Once dry, the owl and wings had popped off but I just re-glued them on without any issue. I find that air dry clay doesn’t like to stick to itself and I just plan to glue things back on. A little more time to let the glue dry and then it was on to painting. I started with a coat of black acrylic paint, making sure to get down into the carvings. I gave my egg two coats of black. Again, more time to dry and then onto the gilding! This was my favorite part of the egg. I used DecoArt Metallic Lustre in Gold Rush. It is a wax and I just rubbed it on using a paper towel. Super easy! I made sure to just add the gold to the top of my egg and not into the carving.

Decoration for our Harry Potter Party

I really liked how the egg turned out and the primitive style carvings made it an easy project. Good luck with your own Golden Eggs – super fun!

What mysteries are held in this clue??

 

Harry Potter Party – Cauldron DIY

Today is the day for some, bubble, bubble, toil and trouble! If you saw my porch photos you might have noticed my little cauldron. When I started on this particular project I knew that I wanted something different. I found lots of “regular” plastic cauldrons but wanted something with a different shape. I did lots of research on cauldrons. The cast iron cauldrons were very expensive and then there is the issue of what do you do with it afterward? I couldn’t find a plastic cauldron that I liked. The cauldrons in the movie have a unique shape and I wanted something more like the film version. I didn’t really get the shape I wanted but I got close and I was very happy with the end result.

Harry Potter Party Decorations – Cauldron

While I was on my research walkabout, I came across some amazing Halloween prop makers sites. These people are incredible. They make me want to go over the top on Halloween. I discover this tutorial. This was for a huge cauldron but I thought that I could apply this to my little project. Later I found this slightly easier tutorial over at Epbot. Well, I was convinced and I was ready to rock and roll.

It started life as a pot

To begin, I purchased 10″ plastic garden pot locally for under $5.  I created a “rib” template to create the shape I wanted for my cauldron. Then, I used my Silhouette Design Software to create my template. I printed this out and was ready to trace and cut.

Template

I traced about 30 ribs onto cardboard and then cut these out. Next, I applied these around my pot (nearly evenly) using duct tape. If you were making a big or a biiiiiiiig cauldron you would want to use more ribs.

Cut from cardboard
Ribbing the pot
As you can see, mostly straight on the ribs

Once my ribs were on and fairly straight I applied more duct tape over my newly shaped cauldron. I made sure to cover all of the ribs and leave no holes.

More ribs!!
Duct tapped
Paper Mache

Now it was onto paper mache! I used a very basic mixture of flour and water along with torn newspaper to cover my cauldron. It is important to tear your newspaper versus cut it. I forgot about this and had terrible lines later that I had to deal with. On my Snitch Pinata, I learned my lesson and only used torn newspaper and the result was much better.

Drying
Drying completed
After a few coats of paper mache

I did a few coats of paper mache, making sure to let each layer dry before I started on the next.

Covered with Paper Clay

Next, I added a layer of paper clay. You can find the recipe here. My clay turned out a little bumpier than I really was hoping for but I think that was owing to the fact that I didn’t use a mixer and that I used nicer toilet paper. I added handles by fashioning circles using air dry clay and then for the fasteners I used toilet paper rolls that I cut up to size. I glued these to my cauldron using high temp hot glue.

So, after this, I gave my cauldron a light coat of just joint compound. Once everything was dry, I gave my cauldron two coats of flat black spray paint.

Custom Harry Potter Cauldron

It was at this point that I forgot that I was supposed to be taking photos as I went along. Once I got my cauldron painted, I added the potion remenants. For this, I used plain old white glue mixed with decorative sand and then a mixture of the sand with raw oatmeal. I just kind of dribbled around the top edge. I was channeling my inner messy witch. This detail sat for 24 hours to fully dry. Then I added the paint. I used slightly watered down craft acrylic paint and painted over my glue dribbles.

Handles made with air dry clay & toilet paper rolls

What a messy potion maker!

I am very pleased with my little cauldron and am toying with the idea of making a big one for Halloween. The additional layer of joint compound makes the little guy a little heavy but that also keeps it from blowing away, which is always a good thing.

This started life as a flower pot
Close up view of the glue, sand and oatmeal mixture
Finishing touches

As always, thanks for stopping by!

 

 

 

 

Harry Potter Party Invitations – Video

Hi-ya!

I have posted my video for the Harry Potter Party Invitations over on YouTube, or you can watch it here. I show the fun fold I did for the invitation itself. This might help you if you are having any trouble.

I hope that my post and video help inspire you to create your own party invitations. You can view the original post here.

More Harry Potter goodness to come!

Harry Potter Party Invitations

Today I will be continuing my posts on our Harry Potter Party and we will be talking about the invitations! Now don’t get me wrong, I love online invitations, they are so quick and easy and you know when people see them but there is really nothing that can possibly compare to receiving a custom handmade invitation in the mail. Maybe I am a little biased, seeing that I have been a card maker for over 20 years.

Harry Potter Party Invitations

These invitations were a huge hit. I got so many positive comments from the parents and kiddos alike. So, if you are planning your own Harry Potter Party I think that it is worth the time and effort to make your own. It just sets the tone for the whole event. The invitations that I will be showing you today are addressed to Harry Potter but each guest received an invitation that was personalized for them.

Letter in the software

I did a fair bit of research into the different Harry Potter invitations that people had made and cobbled together these. I create a letter that invited the guests to attend a preview day at Hogwarts in honor of the birthday girl. Once I had exhausted the internet, I drafted my letter and added a Hogwarts logo at the top and printed them on parchment paper.

Harry Party Potter Invitation Letter

I used the font Lumos for the header and the font Magik for the body. For Professor McGonagall’s signature, I used Scriptina. The font on the envelopes is called 4 Privet Drive. There are a ton of fonts out there but I thought that these worked.

Next, came the envelopes. Again I laid them out on my computer and then printed them onto parchment paper. I purchased an Envelope Punch Board for this project. In the end, I created a 4″x6″ envelope.

Envelope ready to be printed

To create the 4″x6″ envelope I trimmed my paper to 8 1/4″ x 8 1/4″. You can see in this screenshot how that looked in the software. Once I printed each letter I trimmed them to size. I then used the Envelope Punch Board to create the envelope. The step-by-step photos are below.

Envelope:

 

Envelope printed on 8 1/2″ x 11

Trimmed to 8 1/4″ square
Line up on the Envelope Punch Board at 3 3/8″
Punch and score

Rotate and repeat
All four sides punched and scored
Use the back side of the punch to round the corners
All done with the scoring and punching
Glue (I used a glue stick)

I had a weird problem with my letter. When I went to fold my 8 1/5″ x11″ piece of paper to fit in my library card envelope I couldn’t get it to fold nicely. I enlisted the assistance of my engineer hubby and we spent an hour folding and refolding paper. After much trial and error and online research, we came up with the following fold.

Letter Folding

 

Trimmed to 8 1/2″ x 10 1/2″

First, I had to trim my paper down to 8 1/2″ x 10 1/5″. I took a little off the top and a little off the bottom.

Starting the fold – Rotate 90 degrees
Fold top corner to the center.

When you make this fold you are trying to make the folded piece straight on both sides.

Rotate 180 Degrees
Fold top corner to center

Repeat with the opposite corner. This fold works best when these to corner folds do not overlap but come very close

Turn Vertically

Now I turned the paper this way, it is just what works for me. I now take the point that is facing me and fold it up. Keeping the sides even, creating a rectangle.

Fold the bottom up
Crisp up those folds

I use a bone folder to crisp up my folds. Now I turn this around again and fold the two points over.

Rotate and fold the points down.

You should now have a super fancy looking rectangle. I printed my tickets and trimmed them.

Platform 9 3/4 Ticket

I slipped one ticket in each letter. If you want to print your own here is the link.

Ticket in the letter

I also wanted to create an inner envelope for the invitations. This little envelope is called a library card envelope. I used black cardstock, a 1″ circle punch and my scoreboard to create these. Below you will find the step-by-step directions.

Library Card Envelope

 

8 1/2″ x 11″ Cardstock
Trim to 6 1/2 x 8 1/2″
Score at 4″
 Score at 8″
Rotate 90 degrees and score at 6″
Fold
Trim tabs
Continue to trim tabs
This is what you should have
Apply adhesive
 Use 1″ punch to add cut out
Library Card Envelope with the folded Invitation.
Inner envelope complete

 

Now I was ready to put it all together. The letters were folded to fit in the black envelopes and the tickets were placed in the middle of the letters. Then the smaller envelopes were placed in the parchment envelopes. The last step was adding the wax seal. I had ordered a kit for these and they were a huge hit. There is clearly some plastic in the wax because they are flexible and didn’t break in the mail.

Place letter and ticket in the library card envelope
Assembled – a perfect fit
Fold top down
Glue and add wax seal

A lot of work but totally worth it! I did video one of these and will be working on adding that!

 

 

 

Harry Potter Party (Part One)

Yeah, I am finally back! This party was a success and I have nearly recovered. We have the bulk of the decorations down and boxed away and nearly all the items that were moved have been returned. So, my plan for this series of post will be this, I am going to walk you through the party. I will share what all the kids did and the order. Then any projects that I haven’t shared will be shared in individual posts. Without further ado!

Ready for Hogwarts

To start, we decorated our front porch. I made a Beware Whomping Willow sign that I staked out in front of our tiny tree. I also made one that said, “Wizards Welcome, Muggles Tolerated.”  The second sign was placed in our large empty flower pot that lives on the front porch. Initially, I thought about getting flowers or some other plant for it but the sign, a last minute addition, became one of my favorites signs from the party.

Party entry – Harry Potter Party

We had our Bentwood Trunk (ordered on Ebay from the UK), a new trunk I purchased locally at a discount outlet, a brown wrapped package (addressed to the birthday girl and from Flourish & Blotts), Hedwig in her cage, the Gryffindor scarf, aged cauldron, Nimbus 2000, and Quidditch goggles all decorating the front porch. I hung our Hogwarts Express sign from the eave and added the Hogwarts House Bunting that I made. The big draw was the “brick wall” the kiddos passed through to enter the party. We also had out our directional sign posts. I created each of the signs and just put on as many as I could manage!

Directional Signpost – Harry Potter Pary

Once they entered the house, our guests were greeted by the House Banners and Always canvas down the hallway. To the left, in my studio, we had set-up a photo booth. I used a black cloth backdrop and stands that I have for my photography as the backdrop. We had props that I printed from the WB site. That I glued to foam core and added handles. I also had a wanted poster, complete with Azkaban Prison number card and then our Ford Anglia cut out. The kids had a blast getting their pictures taken. We did the photo booth area as they entered in order to give the guests time to arrive. We also used it again when one of our classes ended a little early.

Have you seen this wizard?
In the Flying Car

Once all of the guests arrived we performed our Sorting Ceremony. Now, I figure that nearly all of the kids would want to be in Gryffindor so a true Sorting Ceremony wouldn’t net me the three classes that we needed. What I did instead was to create badges each with a dragon on them. We had green, red, and yellow. Each kiddo came up and put on the hat, the reached into my cauldron and pulled out their badge. This divided them up into groups of six each.

Sorting Ceremony

Then we sent them off for their first class. We sent one group to the basement for Portions, one to Quidditch, and one to Herbology. For Quidditch, we set up the Quidditch Cornhole boards on the side of our house. The weather was perfect! On the back porch was Herbology, here the kiddos were planting Mandrakes. In the basement, Snape was teaching the kids to make slime. Each session was 20 minutes and then they switched.

Quidditch Cornhole
Herbology
Snape on the way to Potions

Once we had worked through our three classes, it was on to Defense Against the Dark Arts as a large group. We had black balloons, filled with helium. In each balloon was a Patronus. I had cut each animal out of glitter cardstock and then inserted them into each balloon before I inflated them. We had:

  • Pheonix
  • Dragon
  • Dog
  • Otter
  • Stag
  • Rhinocerus
  • Lion
  • Tiger
  • Owl
  • Ram
  • Wolf
  • Horse
  • Fox
  • Cat
  • Shark
  • Dolphin
  • Eagle

I brought out the balloons and each guest selected one balloon. Then we went around the room and each kiddo used the special wand ( a spare wand with a large pin taped on) to pop their balloon and find their Patronus, making sure to give a loud “Expecto Patronum” before the popping. I held the balloons for each student and managed to have no one stab me. So a victory in my book.

This gets us to about half-way on the party activities. The next post will detail our trip to Gringotts and Olivanders and then the food!

 

 

Happy Birthday Banner – Harry Potter Party

Good Morning,

Things are in full swing here. Preparation for our party is plugging right along. As usual, everything is taking longer than expected but that is how it goes. Yesterday I spent what felt like half the day running around getting more project supplies and the other half fighting with my sewing machine. In spite of the challenges and nearly no time to blog, projects are getting completed and checked off the master list. So, on to today project!

Cardstock Happy Birthday Banner

Today I will be sharing more of a “preview” since I wasn’t able to hang the full Happy Birthday Banner yet. There are a ton of options when it comes to creating a banner and a quick internet search will net you plenty of ideas. I really wanted something that looked like shields with the Harry Potter Font for the lettering. I, once again, used my Silhouette Design Software and Silhouette Cameo to create the project.

Step 1

To begin, I created tracked down a shield shape that I liked and brought that into my program. Next, used the Offset tool to create an Internal Offset of .25 inches. This will be the shape I use to create the thin frame that holds the shield design in place.  Before I created a compound path with my two shield shapes I copied the larger shape, this will be the background for the shield. I then created a compound shape with the frame.

Step 2
Step 3

At this stage, I added color to my shapes. This helps me view the design and make sure that I don’t delete or forget if I am working in the foreground or background.

Step 4

Now, to add the shield details. For the Gryffindor shield, I added to blocks of color. I started by copying my background and changing the color to match my foreground. Then I used the Knife Tool I cut the shape into quarters. If you hold the Shift-Key while you drag the Knife it will draw a perfectly straight line. This is super helpful, if like me straight lines are a challenge for you.

Step 5

Now, I had four blocks of shield, but I only needed two so I deleted the other two. Now to join these to my frame. I used my Align tools to get everything lined up and then merged it together. I made the Slytherin and Ravenclaw shields in a very similar manner but I used rectangles of different sizes.

Step 6

The one that was different was the Hufflepuff shield. This one was created using a diamond background. I’ll admit it is my favorite. I really wanted to make on with fleur-de-lys but they are a little tricky to have only two shield parts. For the diamonds, I a basic diamond background I had in my library that I purchased from the Silhouette Online Store. I added this to my design, resized to fit and used the Merge Tool to create the design.

Hufflepuff – Adding the diamonds
Resized and merged

Now I was ready to create the lettering. I started by typing the first letter, “H” using the Harry P font and resizing to fit my shield. Then I used the Offset tool to create the shadow. Then it was just a matter of replicating this for each of the letters that I would use for the banner.

I was ready to start cutting. I cut all of the backgrounds first, from each appropriate color and then I cut the foreground shapes. Each shield fit on one piece of cardstock. The I cut all the letter shadows out of white cardstock and the main letters from black cardstock. At this point, there were little triangles just strewn about my workspace. Once everything was cut, I set to work with my adhesive and glued everything together. I used pop dots on the letters.

Assemblage
The four houses represented

Since this will be a focal point, I wanted to be sure that the shields tear away from the ribbon holding them so  I added eyelets to the corners of each shield. I then strung my banners together with black ribbon. I am still thinking about adding a little glitter to the banners but that may be an “if I have time” project.

While this is a pretty simple project it did take a bit of time but I think that it was totally worth it! There are still potion bottles and directional signs in progress and I just completed sewing my daughter’s robe yesterday, so more to share. The invitations will be going out this week, barring any unforeseen mishaps! We are also anxiously awaiting the delivery of our very own Bentwood Steamer Trunk which should be arriving from England next week.

Created by Jennifer Miner

Thanks for stopping by!